Product

MODEL Z1 : Pressure Gauge Snubber, Adjustable





It is intended to suppress the effect of pressure pulses and pressure peaks, which are the most common reasons for instrument failure.
For long life services of pressure instrument by reducing the damage effects of pulsation.
They can be utilized to change the amount of restriction.
Application : pumps, compressors, hydraulic presses or fluid power applications

Body : Stainless Steel 304, 316 or Brass
Adjustable system : Stainless steel 316
Connection : 1/4" or 1/2" NPT or BSP ( Male x Female )
Temperature Rating : -30 to 200 °C

MODEL Z2 : Pressure gauge Snubber, Adjustable



It is intended to suppress the effect of pressure pulses and pressure peaks, which are commnon reasons for instrument failure.
For long life services of pressure instrument by reducing the damage effects of pulsation.
Application : widely in pumps, compressors, hydraulic presses or fluid power applications.
Body : Stainless steel 304/ 316 ( Brass optional )
Connection : 1/4" or 1/2" NPT or BSP ( Male to Female )
Temperature rating : -30 to 200 °C

MODEL Z3 : Pressure Gauge Sunbber, Piston



It is intended to suppress the effect of pressure pulses and pressure peaks, which are the most common reasons for instrument failure.
For long life services of pressure instrument by reducing the damage effects of pulsation.
They can be utilized to change the amount of restriction.
Application : Pumps, compressors, hydraulic presses or fluid power applications
Body : Stainless Steel 304, 316 or Brass
Adjustable system : Stainless steel 316
Connection : 1/4" or 1/2" NPT or BSP ( Male x Female ), others optional
Temperature Rating : -10 to 120 °C

MODEL Z4 : Pressure Gauge Snubber, Porous

It is intended to suppress the effect of pressure pulses and pressure peaks, which are the most common reasons for instrument failure.
For long life services of pressure instrument by reducing the damage effects of pulsation.
They can be utilized to change the amount of restriction.



Application : 
pumps, compressors, hydraulic presses or fluid power applications
Body : Brass or Stainless steel 304
Connection : 1/4" FNPT End Instrument / 1/4" MNPT End Process Connection

MODEL Z5 : Pressure Gauge Syphons





MODEL Z23 is to protect the pressure instrument from hot media such as steam and to reduce the effect of rapid pressure surges.
Pigtail form : for vertical installations
Coil form : for horizontal installations
Other forms are optional
Material : Steel, Brass or SS304/316 coil
Connection : 1/4", 1/2", or 1" NPT

MODEL Z11 : Pressure Gauge Cock

MODEL Z15 is a economical way to shut off the flow of air to the instrument, thereby allowing the instrument to be isolated from media or removed from service.
Material : Brass drain pet cock
Connection : 1/4"MNPT X1/4"FNPT

MODEL Z15 : Mini Needle Valve, Brass

To isolate the pressure instrument from the measured fluid or to provide a means of throttling or dampening pressure pulsation.

Connection : 1/4” x 1/4” Female NPT 
Material : Brass bar stock 
Brass seat (integral to body)
 

MODEL Z20 : Test Plug

Quick pressure and temperature test at recommended test point during process, used in heating, ventilation and air conditioning industries.
End Process connection : 1/4" or 1/2" MNPT 
Material : Brass body
Nordel core
Plastic cap retainer
Operating pressure : 1,000 PSI 
Process temperature : 350°F (176°C)

MODEL Z21 : Test Plug

Brass Hex
1/4"NPT Female gauge connection.
Stainless steel plobe Ø3x40mm

MODEL Z22 : Manometer cock 3 way

Brass body
Plastic handle
Black steel or brass adapter
G1/2 or M20x1.5 connection
16 or 25 bar test pressure

MODEL Z23 : Manometer cock 2 way

Brass body
Plastic handle
Black steel or brass adapter
G1/2 or M20x1.5 connection
16 or 25 bar test pressure

MODEL Z25 : Tri-Clamp

Tri-Clamp : 1.5"(40mm) or 2"(50mm) 
With silicon gasket

MODEL Z27 : Industrial Thermo-well


Material  :
Brass, SS304/316 

Instrument connection : 11/4" UNF
Process connection : 3/4" NPT Male
Construction : Stepped construction standard.
                     ( Tapered construction optional )

MODEL Z28 : Bimetal Thermo-well

Material : SS304, SS316, or Brass
Thermometer Connection: 1/2” NPSM female, or BSP
Process Connection: 3/4”, 1/2” or 1” NPT male or BSP
Bore: 0.260” (6.5mm) bore
Construction: Stepped construction

MODEL Z29 : Thermo-well, Flanged

Designed for use on a closed system. Isolates temperature sensor from process media.
Material : SS304 or SS316
Flange and rating : 1", 1.5", 2" & 150#, 300# 


MODEL Z30 : Sanitary Thermo-well

To set up a "sealed system", whereby the thermometer can be removed from the application.
To protect the thermometer from possible exposure to the media. Designed specifically for sanitary requirements of the food and dairy industry.

Material : Stainless steel 316
Thermometer connection : 1/2"NPT or BSP
Connection : 1.5", 2", 3" Tri-clamp
Bore : 0.260" ( 6.5mm ) bore standard
Stem length : As per clients request  


MODEL Z31 : Weld-in thermerwell

Utilized anywhere a welded thermowell is required, high pressure and/or high vibration.

Material : SS304, SS316
Bore : 0.260" ( 65mm) or as per clients' request
Thermometer connection : 1/2"NPT

MODEL Z35 : Copper bulb

Copper bulb
G1/2 male union
Stem Ø10x0.5mm
With black steel clamp




Contact us : ares.chou@msa.hinet.net